Civil Engineering Tools

Home > 🏷️ Unreconciled Layers

Reconcill_All_Layers

Short description

🧹 Reconcill_All_Layers is an AutoCAD and Civil 3D AutoLISP utility for clearing unreconciled-layer data from the active DWG.
🔕 It removes AutoCAD layer reconciliation markers and disables new-layer evaluation warnings by setting LAYEREVAL and LAYERNOTIFY to 0.

Command:

🚀 Main command: Reconcill_All_Layers
🧰 Run the command in the active drawing to clear unreconciled-layer information for all layers and stop the repeated Unreconciled Layers notification workflow.

Description:

🧹 Reconcill_All_Layers is an SEO-friendly AutoCAD layer cleanup tool focused on unreconciled layers, layer notification control, and CAD production drawing maintenance.
🔍 The routine loops through every layer in the active document, accesses each layer extension dictionary, and removes the ADSK_XREC_LAYER_RECONCILED xrecord when it exists.
🔕 After clearing the reconciliation markers, the tool turns off AutoCAD new-layer evaluation with LAYEREVAL set to 0 and layer notification warnings with LAYERNOTIFY set to 0.
📌 This is useful for Civil 3D drawings, xref-heavy CAD files, project templates, copied DWG files, and production drawings where old unreconciled-layer warnings interrupt drafting work.
⚙️ The routine uses Visual LISP and ActiveX access to the current AutoCAD document and layer collection, making it fast and direct for all layers in the DWG.

Helper function: (if any)​

🧩 vlax-get-acad-object retrieves the running AutoCAD application object.
🧩 vla-get-ActiveDocument accesses the current drawing.
🧩 vla-get-Layers returns the layer collection that is processed by vlax-for.
🧩 vla-GetExtensionDictionary checks each layer for stored extension dictionary data.
🧩 vla-Remove deletes the ADSK_XREC_LAYER_RECONCILED record when available.
🧩 setvar applies the LAYEREVAL and LAYERNOTIFY system variable changes.

Functionalities:

✅ Clears unreconciled-layer metadata from every layer in the active AutoCAD drawing.
✅ Removes the ADSK_XREC_LAYER_RECONCILED xrecord from layer extension dictionaries when present.
✅ Disables AutoCAD’s new-layer evaluation system using LAYEREVAL = 0.
✅ Disables unreconciled-layer notification warnings using LAYERNOTIFY = 0.
✅ Uses safe vl-catch-all-apply wrappers while removing layer dictionary records.
✅ Prints a command-line confirmation after the drawing has been processed.
✅ Helps clean DWG files before plotting, xref management, delivery, archiving, or CAD standards checking.

Result:

📊 The active DWG no longer stores previous unreconciled-layer baseline records on the processed layers.
🔕 AutoCAD stops showing unreconciled-layer notifications for the current layer evaluation settings.
🧹 The drawing becomes cleaner for production drafting, Civil 3D plan preparation, template reuse, and xref coordination.

Images, animations etc.

Pixel

XAML code:

<ResourceDictionary
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:src="clr-namespace:Autodesk.Windows;assembly=AdWindows">
    
<src:RibbonToolTip x:Key="Reconcill_All_Layers">
<src:RibbonToolTip.ExpandedContent>
<StackPanel>
<TextBlock Background="AntiqueWhite" TextAlignment="Left">
<Bold>Function Syntax: Command</Bold>
<LineBreak/>
<Bold>Version: 1.0 Date:</Bold>
<LineBreak/>
<LineBreak/>
<Hyperlink>N/A</Hyperlink>
<LineBreak/>


<Bold><Run Foreground="DodgerBlue">Description</Run></Bold><LineBreak/>
<Run Foreground="White">🧹 Reconcill_All_Layers is an AutoCAD and Civil 3D AutoLISP utility for clearing unreconciled-layer information from the active DWG.</Run><LineBreak/>
<Run Foreground="LimeGreen">🔕 It removes stored layer reconciliation markers and disables repeated Unreconciled Layers warnings by setting LAYEREVAL and LAYERNOTIFY to 0.</Run><LineBreak/>
<LineBreak/>

<Bold><Run Foreground="DodgerBlue">Function Syntax</Run></Bold><LineBreak/>
<Run Foreground="White">🚀 Main command: </Run><Bold><Run Foreground="Orange">Reconcill_All_Layers</Run></Bold><LineBreak/>
<LineBreak/>

<Bold><Run Foreground="DodgerBlue">SEO Optimized Overview</Run></Bold><LineBreak/>
<Run Foreground="White">🧹 This AutoCAD layer cleanup tool is designed for drawings affected by unreconciled-layer warnings, old layer reconciliation baselines, and repeated CAD notification messages.</Run><LineBreak/>
<Run Foreground="White">🔍 The routine scans the full layer collection in the active drawing and checks every layer extension dictionary.</Run><LineBreak/>
<Run Foreground="White">🧩 When the AutoCAD reconciliation xrecord </Run><Bold><Run Foreground="Orange">ADSK_XREC_LAYER_RECONCILED</Run></Bold><Run Foreground="White"> is found, it is removed from the layer dictionary.</Run><LineBreak/>
<Run Foreground="White">🔕 The routine then sets </Run><Bold><Run Foreground="Orange">LAYEREVAL = 0</Run></Bold><Run Foreground="White"> and </Run><Bold><Run Foreground="Orange">LAYERNOTIFY = 0</Run></Bold><Run Foreground="White"> to stop new-layer evaluation notifications.</Run><LineBreak/>
<Run Foreground="White">📌 This is useful for Civil 3D production drawings, xref coordination files, copied project templates, archived plans, and CAD standards cleanup workflows.</Run><LineBreak/>
<LineBreak/>

<Bold><Run Foreground="DodgerBlue">Important AutoLISP and ActiveX Calls</Run></Bold><LineBreak/>
<Run Foreground="White">🧩 </Run><Bold><Run Foreground="Orange">vlax-get-acad-object</Run></Bold><Run Foreground="White"> retrieves the running AutoCAD application object.</Run><LineBreak/>
<Run Foreground="White">🧩 </Run><Bold><Run Foreground="Orange">vla-get-ActiveDocument</Run></Bold><Run Foreground="White"> accesses the current DWG.</Run><LineBreak/>
<Run Foreground="White">🧩 </Run><Bold><Run Foreground="Orange">vla-get-Layers</Run></Bold><Run Foreground="White"> returns the complete layer collection.</Run><LineBreak/>
<Run Foreground="White">🧩 </Run><Bold><Run Foreground="Orange">vla-GetExtensionDictionary</Run></Bold><Run Foreground="White"> checks each layer for stored dictionary data.</Run><LineBreak/>
<Run Foreground="White">🧩 </Run><Bold><Run Foreground="Orange">vla-Remove</Run></Bold><Run Foreground="White"> removes the reconciliation xrecord when it exists.</Run><LineBreak/>
<Run Foreground="White">⚙️ </Run><Bold><Run Foreground="Orange">setvar</Run></Bold><Run Foreground="White"> applies LAYEREVAL and LAYERNOTIFY changes.</Run><LineBreak/>
<LineBreak/>

<Bold><Run Foreground="DodgerBlue">Functionalities</Run></Bold><LineBreak/>
<Run Foreground="White">✅ Clears unreconciled-layer metadata from all layers in the active drawing.</Run><LineBreak/>
<Run Foreground="White">✅ Disables AutoCAD new-layer evaluation warnings.</Run><LineBreak/>
<Run Foreground="White">✅ Helps remove persistent Unreconciled Layers messages in DWG files.</Run><LineBreak/>
<Run Foreground="White">✅ Supports Civil 3D and AutoCAD layer management cleanup workflows.</Run><LineBreak/>
<Run Foreground="White">✅ Provides a quick command-line confirmation after processing.</Run><LineBreak/>
<LineBreak/>

<Bold><Run Foreground="DodgerBlue">Workflow Summary</Run></Bold><LineBreak/>
<Run Foreground="White">1️⃣ Load the LISP file with APPLOAD or your startup suite.</Run><LineBreak/>
<Run Foreground="White">2️⃣ Run </Run><Bold><Run Foreground="Orange">Reconcill_All_Layers</Run></Bold><Run Foreground="White"> in the target drawing.</Run><LineBreak/>
<Run Foreground="White">3️⃣ The routine loops through all layers and removes reconciliation xrecords where possible.</Run><LineBreak/>
<Run Foreground="White">4️⃣ LAYEREVAL and LAYERNOTIFY are set to 0.</Run><LineBreak/>
<Run Foreground="White">5️⃣ AutoCAD reports that unreconciled-layer information was cleared.</Run><LineBreak/>
<LineBreak/>

<Bold><Run Foreground="DodgerBlue">Result</Run></Bold><LineBreak/>
<Run Foreground="LimeGreen">📊 The drawing is cleaned from previous unreconciled-layer baseline records and AutoCAD layer notification warnings are suppressed.</Run><LineBreak/>
<LineBreak/>

<Bold><Run Foreground="DarkRed">Important Notes</Run></Bold><LineBreak/>
<Run Foreground="White">⚠️ This routine intentionally changes layer notification behavior by setting LAYEREVAL and LAYERNOTIFY to 0.</Run><LineBreak/>
<Run Foreground="White">⚠️ Use it when the project goal is to reset or suppress unreconciled-layer tracking, not when strict layer reconciliation auditing is required.</Run><LineBreak/>
<Run Foreground="White">📌 The command processes only the active DWG and does not batch-process external drawings.</Run><LineBreak/>
<LineBreak/>

<Bold><Run Foreground="Yellow">Tags</Run></Bold><LineBreak/>
<Run Foreground="Yellow">🏷️ AutoCAD, 🏷️ AutoLISP, 🏷️ Civil 3D, 🏷️ Layer Manager, 🏷️ Unreconciled Layers, 🏷️ LAYEREVAL, 🏷️ LAYERNOTIFY, 🏷️ CAD Standards, 🏷️ DWG Cleanup, 🏷️ Layer Reconciliation</Run><LineBreak/>




</TextBlock>
            
<Grid>
<Image Source="PNG" Stretch="Uniform"/>
</Grid>
<Grid>
<MediaElement
 Source="GIF"
 Stretch="Uniform"
 Visibility="Visible"/>
 </Grid>
</StackPanel>
</src:RibbonToolTip.ExpandedContent>
</src:RibbonToolTip>
</ResourceDictionary>
Reconcill_All_Layers.xamlDownload XAML file

Additional info:

Based on / Source code: Comming soon …

Share this page:

    Page Tag: 🏷️ Unreconciled Layers

    • Reconcill_All_Layers

      —

      by

      Admin

      Short description🧹 Reconcill_All_Layers is an AutoCAD and Civil 3D AutoLISP utility for clearing unreconciled-layer data from the active DWG. 🔕 It removes AutoCAD layer reconciliation markers and disables new-layer evaluation warnings by setting LAYEREVAL and LAYERNOTIFY to 0. Command:🚀 Main command: Reconcill_All_Layers 🧰 Run the command in the active drawing to clear unreconciled-layer information for…