Short description
π§Ύ Make_layers_linetypes_draw is an AutoCAD AutoLISP linetype catalog generator that draws sample polylines and MTEXT labels for loaded linetypes.
ποΈ It uses DCL dialogs for start point, length, row spacing, linetype scale, label content, wildcard filtering, paging, and linetype selection.
Command:
π Main command: DRAW_LTYPE_LAYERS
𧩠Load the LSP in AutoCAD or Civil 3D, then type the command at the command line.
Description:
π§Ύ This AutoCAD linetype visualization tool scans the active drawing’s loaded linetypes and creates a graphical reference sheet.
ποΈ The main DCL dialog controls the start point, sample line length, row step, linetype scale, label offset, and MTEXT content mode.
π A second linetype selection dialog supports paging, Select All, Select None, global selection, and wildcard filtering.
𧱠For each selected linetype, the routine creates or updates a layer with the same name, assigns that linetype to the layer, and draws a sample LWPOLYLINE.
π It then places MTEXT labels showing the linetype name, the layer name, or both side by side.
π The command excludes ByLayer, ByBlock, and Continuous from the generated catalog.
Helper function: (if any)β
𧩠dlt-write-settings-dcl writes the main Draw Linetype Layers DCL dialog.
𧩠dlt-write-page-dcl writes the paginated linetype selection dialog.
𧩠dlt-run-lt-sel runs the linetype selector with paging and selection-state memory.
𧩠dlt-apply-filter applies wildcard filtering to the linetype list.
𧩠dlt-count-selected returns the number of selected linetypes.
𧩠entmake creates the LWPOLYLINE and MTEXT entities used in the catalog.
Functionalities:
β
Scan all loaded linetypes in the active drawing.
β
Exclude ByLayer, ByBlock, and Continuous from the output list.
β
Choose a drawing start point manually or by picking a point.
β
Set sample line length, vertical row spacing, linetype scale, and label gap.
β
Select only specific linetypes using a paginated DCL list.
β
Filter linetypes with wildcard patterns.
β
Draw one sample polyline per selected linetype.
β
Create/update matching layers and assign their linetype property.
β
Place MTEXT labels as linetype name, layer name, or both.
Result:
β
The drawing receives a clean linetype reference sheet made from real loaded linetypes.
β
Each selected linetype is represented by a sample LWPOLYLINE and MTEXT label.
β
The output can be used for CAD standards review, plotting checks, linetype libraries, and Civil 3D template documentation.
Images, animations etc.
XAML code:
ο»Ώ<ResourceDictionary
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:src="clr-namespace:Autodesk.Windows;assembly=AdWindows">
<src:RibbonToolTip x:Key="DRAW_LTYPE_LAYERS">
<src:RibbonToolTip.ExpandedContent>
<StackPanel>
<TextBlock Background="AntiqueWhite" TextAlignment="Left">
<Bold>Function Syntax: DRAW_LTYPE_LAYERS</Bold>
<LineBreak/>
<Bold>Version: 1.1 Date: 20.06.2026 6:38:54PM</Bold>
<LineBreak/>
<Hyperlink>N/A</Hyperlink>
<LineBreak/>
</TextBlock>
<Bold><Run Foreground="DodgerBlue">Description</Run></Bold><LineBreak/>
<Run Foreground="White">π§Ύ Make_layers_linetypes_draw is an AutoCAD AutoLISP linetype catalog generator that draws sample polylines and MTEXT labels for loaded linetypes.</Run><LineBreak/>
<Run Foreground="White">ποΈ It uses DCL dialogs for start point, length, row spacing, linetype scale, label content, wildcard filtering, paging, and linetype selection.</Run><LineBreak/>
<LineBreak/>
<Bold><Run Foreground="DodgerBlue">Function Syntax</Run></Bold><LineBreak/>
<Run Foreground="White">π Main command: </Run><Bold><Run Foreground="Orange">DRAW_LTYPE_LAYERS</Run></Bold><LineBreak/>
<Run Foreground="White">π Load the LSP file with APPLOAD or from your AutoCAD startup suite, then run the command from the command line.</Run><LineBreak/>
<LineBreak/>
<Bold><Run Foreground="DodgerBlue">SEO Optimized Overview</Run></Bold><LineBreak/>
<Run Foreground="White">π§Ύ This AutoCAD linetype visualization tool scans the active drawing's loaded linetypes and creates a graphical reference sheet.</Run><LineBreak/>
<Run Foreground="White">ποΈ The main DCL dialog controls the start point, sample line length, row step, linetype scale, label offset, and MTEXT content mode.</Run><LineBreak/>
<Run Foreground="White">π A second linetype selection dialog supports paging, Select All, Select None, global selection, and wildcard filtering.</Run><LineBreak/>
<Run Foreground="White">𧱠For each selected linetype, the routine creates or updates a layer with the same name, assigns that linetype to the layer, and draws a sample LWPOLYLINE.</Run><LineBreak/>
<Run Foreground="White">π It then places MTEXT labels showing the linetype name, the layer name, or both side by side.</Run><LineBreak/>
<Run Foreground="White">π The command excludes ByLayer, ByBlock, and Continuous from the generated catalog.</Run><LineBreak/>
<LineBreak/>
<Bold><Run Foreground="LimeGreen">Primary Workflow</Run></Bold><LineBreak/>
<Run Foreground="White">1οΈβ£ Run DRAW_LTYPE_LAYERS.</Run><LineBreak/>
<Run Foreground="White">2οΈβ£ Set the start point, sample length, row step, linetype scale, MTEXT gap, and label mode.</Run><LineBreak/>
<Run Foreground="White">3οΈβ£ Open the linetype selector and choose which loaded linetypes to draw.</Run><LineBreak/>
<Run Foreground="White">4οΈβ£ Apply optional wildcard filtering and paging selection.</Run><LineBreak/>
<Run Foreground="White">5οΈβ£ The routine draws one sample line and label per selected linetype.</Run><LineBreak/>
<LineBreak/>
<Bold><Run Foreground="LimeGreen">Core Functionalities</Run></Bold><LineBreak/>
<Run Foreground="White">β
Scan all loaded linetypes in the active drawing.</Run><LineBreak/>
<Run Foreground="White">β
Exclude ByLayer, ByBlock, and Continuous from the output list.</Run><LineBreak/>
<Run Foreground="White">β
Choose a drawing start point manually or by picking a point.</Run><LineBreak/>
<Run Foreground="White">β
Set sample line length, vertical row spacing, linetype scale, and label gap.</Run><LineBreak/>
<Run Foreground="White">β
Select only specific linetypes using a paginated DCL list.</Run><LineBreak/>
<Run Foreground="White">β
Filter linetypes with wildcard patterns.</Run><LineBreak/>
<Run Foreground="White">β
Draw one sample polyline per selected linetype.</Run><LineBreak/>
<Run Foreground="White">β
Create/update matching layers and assign their linetype property.</Run><LineBreak/>
<Run Foreground="White">β
Place MTEXT labels as linetype name, layer name, or both.</Run><LineBreak/>
<LineBreak/>
<Bold><Run Foreground="DodgerBlue">Important Commands and Helper Functions</Run></Bold><LineBreak/>
<Run Foreground="White">𧩠dlt-write-settings-dcl writes the main Draw Linetype Layers DCL dialog.</Run><LineBreak/>
<Run Foreground="White">𧩠dlt-write-page-dcl writes the paginated linetype selection dialog.</Run><LineBreak/>
<Run Foreground="White">𧩠dlt-run-lt-sel runs the linetype selector with paging and selection-state memory.</Run><LineBreak/>
<Run Foreground="White">𧩠dlt-apply-filter applies wildcard filtering to the linetype list.</Run><LineBreak/>
<Run Foreground="White">𧩠dlt-count-selected returns the number of selected linetypes.</Run><LineBreak/>
<Run Foreground="White">𧩠entmake creates the LWPOLYLINE and MTEXT entities used in the catalog.</Run><LineBreak/>
<LineBreak/>
<Bold><Run Foreground="LimeGreen">Result</Run></Bold><LineBreak/>
<Run Foreground="White">β
The drawing receives a clean linetype reference sheet made from real loaded linetypes.</Run><LineBreak/>
<Run Foreground="White">β
Each selected linetype is represented by a sample LWPOLYLINE and MTEXT label.</Run><LineBreak/>
<Run Foreground="White">β
The output can be used for CAD standards review, plotting checks, linetype libraries, and Civil 3D template documentation.</Run><LineBreak/>
<LineBreak/>
<Bold><Run Foreground="DarkOrange">Operational Notes</Run></Bold><LineBreak/>
<Run Foreground="White">π The command only draws linetypes already loaded in the active drawing.</Run><LineBreak/>
<Run Foreground="DarkRed">β οΈ Large linetype libraries may create many layers, lines, and MTEXT labels.</Run><LineBreak/>
<Run Foreground="White">π The routine restores the previous current layer after drawing the catalog.</Run><LineBreak/>
<LineBreak/>
<Bold><Run Foreground="DodgerBlue">Best Use Cases</Run></Bold><LineBreak/>
<Run Foreground="White">π§Ύ Linetype library documentation.</Run><LineBreak/>
<Run Foreground="White">π¨οΈ Plot testing and visual QA of loaded linetypes.</Run><LineBreak/>
<Run Foreground="White">π CAD standards sheets for project templates.</Run><LineBreak/>
<LineBreak/>
<Bold><Run Foreground="Yellow">Tags</Run></Bold><LineBreak/>
<Run Foreground="Yellow">π·οΈ AutoCAD, π·οΈ AutoLISP, π·οΈ Civil 3D, π·οΈ Linetype Catalog, π·οΈ LINETYPE, π·οΈ LWPOLYLINE, π·οΈ MTEXT, π·οΈ DCL Dialog, π·οΈ Layer Creation, π·οΈ CAD Standards</Run><LineBreak/>
<Grid>
<Image Source="PNG" Stretch="Uniform"/>
</Grid>
<Grid>
<MediaElement
Source="GIF"
Stretch="Uniform"
Visibility="Visible"/>
</Grid>
</StackPanel>
</src:RibbonToolTip.ExpandedContent>
</src:RibbonToolTip>
</ResourceDictionary>