Main command: CCTEXT
Load method: APPLOAD
Published version: 1.0 dated 15.12.2016

Main command: Spline2Poly
Conversion engine: SPLINEDIT Convert to Polyline precision 1

Main command: SLOPE_01

Main command: SelectStraightEntities

Main dialog: ParallelPolylinesOption
Direct close: CLOSEPARALLELPOLYLINES
Direct unclose: UNCLOSEPARALLELPOLYLINES

Available commands: PL-VFI, PL-CW, PL-CCW, lwcl, RL, ENTREV, ENTREVS, PL-L2A, PL-A2L, PL-JOIN, PL-JOIN3D, PL-DIV, PL-DIVALL, PL-VxAdd, Pl-VxRdc, Pl-VxDel, PL-VxOpt, PL-NOARC, PL-CLONE, PL-VxMove, PL-Vx1, R3P, PL-SgInfo, MPL, ConvTo2d, ConvTo3d, PL-SgWidth, PL-CSE, PL-P90, PL-MENU, PLTOOLS-MENU

Main command: OffsetAndLayer

Main command: MultiOffsetBothSidesWithLayerExtra
Alias: MOBSWLE
Dock: MOBSWLEDOCK
Undock: MOBSWLEUNDOCK
Predefined profiles: OLPredefinedProfiles
Diagnostics: OLDebug

Main command: CPL_2

Main command: CPL

Main command: ExtendStartEndMultiple
Alias: DEX
Debug command: DEXDEBUG

Main launcher: BR2P
Break intersections: BreakAll
Boundary Offset: boffset
Region to Polyline: Region2Polyline
Delete open lines and polylines: DEL_OPEN_PL
Union areas: JoinAreas

Main command: ExtendStartEndMultiple

Main command: DynamicDivide

Main command: DuplicateToNewLayer and CloseParallelPolylines

Main command: DoubleOffset
Alias: DOff

🚀 Main command: ConvertMultiplePolylines
🎛️ Processing modes: Select entities or All entities in drawing
📏 Default joining fuzz distance: 0.01
🔗 Set joining fuzz distance to 0 for conversion only

Main window: LISPLOADEXTRA
Last session report: LISPLOADREPORT
Loader diagnostics: LISPLOADDIAG

Startup action: NETLOAD LispLoader.dll
Configuration file: LoaderConfig.txt
Log file: LispLoader.log

LayoutVPOverrides

🚀 Startup behavior: the DLL loader runs when [username]_alldlls.lsp is loaded.
⚙️ AutoCAD loading command: NETLOAD
📄 Error report: load_report.txt in the configured Lisp_menu folder.

🚀 Startup behavior: the loader runs when acaddoc.lsp is loaded by AutoCAD.
⚙️ Main loading methods: load for LSP FAS and VLX files plus NETLOAD for DLL files.
📄 Report file: load_report.txt in the configured Lisp_menu folder.

🚀 Main command: ViewportMatchOrientation
🧭 Select a source viewport, then select a target viewport, and the target receives the source TwistAngle.

🚀 Main command: VportsPoly2Rectang
⚡ Alias command: VportShapeConv
🧰 Opens an enhanced DCL manager for detecting, filtering, locking, zooming, and converting rectangular and polygonal clipped viewports.

🚀 Main command: PLOTEXTRA018
🧾 Log command: PLOTEXTRALOG
🧰 Opens a Civil 3D styled .NET plot dialog with preview, logging, PDF/project settings, and plot configuration controls.

🚀 Main command: cps
🧰 Load the LSP file with APPLOAD, then run the command from the AutoCAD command line.

🚀 Main command: Delete2Layouts
🔁 Alias command: _Delete2Layouts
🧰 Pick one block or xref reference, filter target layouts with * and ?, select layouts, then delete matching INSERT instances from those layouts.

🚀 Main auto command: CPMS
📄 Paper Space to Model Space command: CopyPaper2Model
🖼️ Model Space to Paper Space command: MS2PS
🧰 The CPMS command auto-dispatches depending on the current space: Paper Space runs CopyPaper2Model, otherwise it runs MS2PS.

🚀 Main command: SelectCreateLayerFilter
⚡ Alias command: SCLF
🧰 Workflow: select drawing entities, review their unique layers in the dialog, filter names with * and ?, select the layers to include, then apply the generated AutoCAD layer filter expression.

🚀 Main command: ChangeVPLayerColor
🎨 Main dialog: VP Manager v19.1 / VP Layer Color Tool
🧰 Workflow: filter layers, select layers, configure Bestand/Neu presets, choose colors, select target layouts, then apply viewport color overrides.

🚀 Main command: Reconcill_All_Layers
🧰 Run the command in the active drawing to clear unreconciled-layer information for all layers and stop the repeated Unreconciled Layers notification workflow.

🚀 Main command: DRAW_LTYPE_LAYERS
🧩 Load the LSP in AutoCAD or Civil 3D, then type the command at the command line.

🚀 Main command: LayersName2Clipboard
🧩 Load the LSP in AutoCAD or Civil 3D, then type the command at the command line.

🚀 Main command: LayerImport
🧰 Utility command: LI_FOLDERS
🧩 Load the LSP in AutoCAD or Civil 3D, then type the command at the command line.

🚀 Main command: LayerFilterFreezeThawOnPlotVPFreeze
🧰 Dialog workflow label: Layer Filters
🖼️ Viewport actions: VP Freeze and VP Thaw require selecting a paper-space floating viewport.

🚀 Layer change command: ChangeLayerToCurrent – opens a searchable layer selector and moves selected objects to the chosen layer

🚀 Layer change command: ChangeLayerToCurrent – opens a searchable layer selector and moves selected objects to the chosen layer

🚀 Load/install file: NamespaceFix.lsp
🧰 Startup Suite use: add the LSP to APPLOAD Startup Suite for automatic protection.
🧩 Internal repair functions: C3D-RestoreStar and C3D-RestoreStarCmd
🔄 Reactor: vlr-command-reactor with :vlr-commandEnded callback.

🚀 Main command: BG
🧰 Dialog command: BGDCL
⚫ Quick command: BGBlack
⚪ Quick command: BGWhite
🩶 Quick command: BGGrey
🔄 Toggle command: BGT
🎨 The dialog provides global color mode, individual Model/Paper/Block Editor color selectors, Apply, OK, and Cancel.

🚀 Main command: AM2
📝 Step 1: Select TEXT or MTEXT source objects.
📐 Step 2: Select a LINE, LWPOLYLINE, or POLYLINE to provide MLeader arrowhead and landing points.

🚀 Main command: SetupOverriteDimStyles
🖱️ The user first selects an object to use as the style source.
⚙️ The DCL dialog then lets the user choose which workspace settings to update: current layer, text style/text size, and dimension or MLeader style.

MLTOOLS – open the MLeader Vertex Tool panel.
MLADDVERT – select an MLeader and pick a new bend/inflection vertex.
MLADDVERT_HANDLE – add a vertex by entering an MLeader handle.
MLVERSION – print the loaded plugin version and build metadata.

Xline2Poly
Xline2Poly_DEBUG

L2XL
L2XL_DEBUG

NETLOAD ParallelPipesNet.dll, then run VTPCS at the AutoCAD command line.

30PARAEXIST / PARA30EXIST

Lin_Shx_Loader

PARA30 / 30PARA

Comming soon …

🚀 Command syntax: ReplaceBlock

Type ReplaceBlock in the AutoCAD command line, select one or more block references, choose the replacement block from the dialog list, then confirm with OK.

RenameBlockList

CopyBlockChangeLayer | RB

🧰 Main commands: LLP, SHOWPANEL, PLACELEADER, ADDLAYER, REMOVELAYER, LISTLAYERS, ADDBLOCK, REMOVEBLOCK, LISTBLOCKS, LLUPDATEFIELDS, SETUPDIMSTYLES, LOADSETUPDIMSTYLES. Run NETLOAD, load LayerLeaderPlugin.dll, then use LLP or SHOWPANEL to open the modeless Layer Leader panel.

🚀 Main command: NavvCubeDisplayOffOn
🧰 AutoCAD system command used internally: NAVVCUBEDISPLAY
🔄 Internal sequence: NAVVCUBEDISPLAY 1, then NAVVCUBEDISPLAY 3

🧰 Main commands:
– MMid2 – move selected AutoCAD objects from a calculated source midpoint to a calculated destination midpoint.
– CMid2 – copy selected AutoCAD objects and place the copied result from the same source midpoint to the destination midpoint.

🚀 Main export dialog command: EXPUCS_DIALOG
🚀 Main import dialog command: IMPUCS_DIALOG
📤 Raw export command: EXPUCS
📥 Raw import command: IMPUCS

🧰 EXPUCS_DIALOG opens a save-file dialog for writing named UCS data to a .ucs file.
🧰 IMPUCS_DIALOG opens a file-selection dialog for importing UCS definitions from an existing .ucs file.
🔧 EXPUCS and IMPUCS are lower-level routines that receive a file path and perform the actual UCS write or read operation.

🚀 Main commands:
– MXR
– MXR_DCL

🧰 Run MXR or MXR_DCL in the AutoCAD command line to open the Arrange XREFs dialog.

🚀 Main command: ExpImpUCS
📤 Export command: ExpUCS
📥 Import command: ImpUCS
🧰 The ExpImpUCS dialog lets the user choose Export UCS or Import UCS, select a predefined project folder, open the LISP folder in Explorer, open the file in Notepad++, reload the script, or open the integrated help dialog.

🚀 Primary command: AC

Type AC in the AutoCAD command line to start the area calculation workflow.

🧭 The command first asks for an object filter:
ANY, POLYLINE, CIRCLE, ELLIPSE, REGION, SPLINE, or HATCH.

🪟 After selecting valid closed objects, AreaCalc opens the Area Calc v2.1 DCL dialog where the user controls labels, units, precision, fields, and report output.

🚀 Primary command: MAKELT2

🧵 Alias helper: makelt2 calls c:makelt2.

🪟 Dialog title: Make Linetype With Embedded Characters.

🖊️ Main action button: Create Linetype.

🚀 Primary commands:
– LINPL
– LINPOLY

🧰 Command-line load message:
– LINPL 004 loaded. Run LINPL or LINPOLY.

🚀 Primary commands:
– LINPL
– LINPOLY

🧰 Command-line load message:
– LINPL 004 loaded. Run LINPL or LINPOLY.

XREFOFFSETLAYER
XREFOFFSETLAYER_006
XOL
XOFFSETCPLAYS
XOFFSETCPLAYS_006

🚀 Main command:
ReplaceBlockList

🧩 AutoLISP command definition:
(defun c:ReplaceBlockList ...)

📌 Workflow:
1. Run ReplaceBlockList.
2. Select one or more replacement blocks from the left panel.
3. Select the matching source blocks to replace from the right panel.
4. Add paired rules in the format SourceBlock -> ReplacementBlock.
5. Preview the number of source instances that will be replaced.
6. Apply the replacement operation.

Primary command: LAYERSIMPORTEXPORT_016
Export command: LAYEREXPORT_016
Import command: LAYERIMPORT_016
Settings command: LAYERSETTINGS_016

Run LAYERSIMPORTEXPORT_016 to open the combined dialog on the Extract / Export tab. Run LAYEREXPORT_016, LAYERIMPORT_016, or LAYERSETTINGS_016 to open the corresponding tab directly.

Primary command: CHANGEBLOCKLAYER_001
Secondary commands: CHANGEBLOCKLAYER, CNL

Run CHANGEBLOCKLAYER_001 in the AutoCAD command line for the collision-safe build-specific command. Run CHANGEBLOCKLAYER or CNL as convenience aliases.

Primary command: ENTITIES2LAYERS
Secondary command: E2L

Run ENTITIES2LAYERS or E2L in the AutoCAD command line to open the Annotation Objects to Layer dialog.

Primary command: ExplodeLinetype
Secondary command: LINEXP

Run ExplodeLinetype in the AutoCAD command line to convert selected TEXT and MTEXT into line geometry and apply the standardized MISC-layer properties. Run LINEXP to use the underlying line-explosion routine without the final CHPROP standardization step.

TTT
TTTCLEAR

Run SaveCUIX in AutoCAD or Civil 3D to open the Save CUI Package dialog.

Primary command defined in the uploaded source: ToolPaletteExporter
Diagnostic command: TPE_DIAG
Source note: the file header also mentions TPEXPORT, but this uploaded version defines C:ToolPaletteExporter and C:TPE_DIAG as command functions.

NETLOAD RibbonManagerPlugin.dll, then run RIBBONMGR to open the Ribbon Manager palette.
Run RIBBONMGRCLOSE to hide the palette without unloading the plugin.

Main commands: LoadIcons and LoadAllIcons.

• LoadIcons scans the configured Help_File root for Icon_*.png files, copies them to the configured Civil 3D support icon folder, and reloads CIVIL.cuix when available.
• LoadAllIcons is an alias that runs the same workflow as LoadIcons.

Command: EditRibbonButton

Diagnostic command: ERB_Debug

Run EditRibbonButton in AutoCAD to open the ribbon button editor. Run ERB_Debug to diagnose CUIX path discovery, cached ribbon structure, file access, and reload prerequisites.

Primary command: CreateFolderStructure
Diagnostic command: CBS_Diag

Run CreateFolderStructure to scan CIVIL.cuix, choose the target ribbon panel and Row 1 group, enter the new command folder name, preview the final path, and create the complete folder structure.
Run CBS_Diag to print and save a diagnostic report with configured paths, CIVIL.cuix detection, cached ribbon data, history values, and environment information.

Primary commands: CMDSEARCHExtra opens the Command Search palette; CMDSEARCHExtraCLOSE closes it; LISPLOADEXTRA opens the standalone Lisp Loader; LISPLOADREPORT opens the load-session report; CMDSEARCHExtraTESTS runs parser and filter self-tests; LISPLOADDIAG writes LISP-related diagnostic method information to the log.

Main AutoCAD commands:
– CMDSEARCH opens the modeless Command Search palette.
– CMDSEARCHCLOSE closes the Command Search palette.
– LISPLOADEXTRA opens the standalone Lisp Loader window.
– LISPLOADREPORT opens the load session report.
– CMDSEARCHTESTS runs the internal parser and filter self-tests.
– LISPLOADDIAG scans loaded assemblies for LISP-related invocation methods and writes diagnostics to the log.

Commands:
– AutoBackupCUIX_Start – enables the automatic command-reactor backup workflow.
– AutoBackupCUIX_Stop – disables the automatic backup reactor.
– AutoBackupCUIX_Now – runs the backup immediately.
– AutoBackupCUIX_Status – prints enabled state, reactor status, schedule, save path, and last backup date.
– AutoBackupCUIX_All – opens the AutoBackupCUIX Control dialog with Start, Stop, Backup Now, Refresh Status, and Close buttons.

Primary command: AddRibbonButton. Support commands: ARB_Debug, ARB_ApplyToCUI, and ARB_ApplyDebug.

Primary AutoCAD command documented by the project file:

• AECVERSION – load AECVersionPlugin.dll with NETLOAD, then run the command from the AutoCAD command line.

The uploaded file is the Visual Studio project file, so command implementation details depend on the C# source files used with this project.

🧰 Load the compiled plugin with NETLOAD and select ToolbarManager_023.dll or the current build DLL generated from ToolbarManager_023.csproj.
🚀 Run the generated command TOOLBARMANAGER_023 to open the modeless WinForms toolbar manager inside AutoCAD or Civil 3D.
📌 The command name is generated from BQ_Build through BuildConstants.CommandName, so future builds use the same pattern, for example TOOLBARMANAGER_024.
🧩 Target platform: AutoCAD Civil 3D 2024 x64, .NET Framework 4.8, WinForms, AutoCAD COM Interop, and ObjectARX managed references such as AcMgd.dll, AcDbMgd.dll, accoremgd.dll, Autodesk.AutoCAD.Interop.dll, and Autodesk.AutoCAD.Interop.Common.dll.

🧰 Load the LISP file with APPLOAD or another AutoCAD LISP loading method, then run IB or ImportBlock.
The command opens a file picker for a source DWG, DWT, or DWS file, scans importable block definitions, displays them in a generated DCL dialog, and optionally inserts the selected block reference into model space or paper space.
Main internal command functions include c:ib, c:ImportBlock, LM:GetDocumentObject, ib:import-block-definition, ib:list-importable-blocks, and ib:write-dcl.

🧰 Load the LISP file with APPLOAD or another AutoCAD AutoLISP loading method, then run InsertBlockFilterScale.
The implemented command function is c:InsertBlockFilterScale.
The diagnostic command is IBB-DEBUG, implemented as c:IBB-DEBUG, and it prints the internal debug log to the AutoCAD command line.
The command opens a generated DCL dialog named ibb_dlg with a filter field, block list, image preview, copy button, scale input, and rotation input.
Target platform: AutoCAD and Civil 3D with Visual LISP COM support through vl-load-com.

🧰 Load the LISP file with APPLOAD or another AutoCAD AutoLISP loading method, then run ExplodeBlocks.
The implemented command function is c:ExplodeBlocks.
The file header mentions XB as a command concept, but this uploaded code defines ExplodeBlocks as the actual callable command unless a separate alias is added.
The command prompts the user to select block references using ssget with an INSERT selection filter, then processes each selected block reference in sequence.
Target platform: AutoCAD and Civil 3D with Visual LISP COM support through vl-load-com.

🧰 Load the LISP file with APPLOAD or by using (load "DeleteObjectFromBlock.lsp") in AutoCAD.
Run ExtractFromBlock to open the shared extraction dialog and pick nested block objects.
Run DeleteObjectFromBlock to open the same dialog and remove nested block objects from a selected block definition.
The target platform is AutoCAD and AutoCAD based vertical products using AutoLISP, Visual LISP COM, DCL dialogs, nested entity selection, and ActiveX database editing.

🧰 Load the plugin with NETLOAD by selecting the compiled DeleteBlockCrossings_yyyyMMdd_HHmmss.dll or the active build output DLL.
🚀 Main commands: DELETEBLOCKCROSSINGS, DBC, and ABBS compatibility alias.
📌 The command can use an existing pickfirst block selection, or it prompts the user to select AutoCAD block references using an INSERT selection filter.
🧩 Target platform: AutoCAD and Civil 3D 2024 x64, C# .NET Framework 4.8, ObjectARX managed API, WinForms modeless dialog, and timestamped DLL build output to avoid AutoCAD file locking.

🧰 Load the AutoLISP file with APPLOAD or LOAD, then run CreateMultipleRectangleBlocks in AutoCAD or Civil 3D.
📌 The command opens a DCL dialog named Make Page Blocks – Settings where the user defines the block suffix, page range, rectangle width, rectangle height, vertical spacing, horizontal step, selection offset, insertion coordinates, rectangle drawing options, and optional OVERKILL processing.
🎯 Target platform: AutoCAD and Civil 3D, using AutoLISP, Visual LISP ActiveX calls, DCL dialog controls, entmake, vla-ZoomWindow, and AutoCAD block table creation.

🧰 Load the LISP file with APPLOAD or a startup suite entry, then run CopyBlockChangeLayer in AutoCAD.
📌 The main AutoLISP entry point is c:CopyBlockChangeLayer, which calls LM:RenameBlockReference in copy mode.
🧩 The tool opens a DCL dialog named Copy / Rename Block with two modes: Copy Rename Block and Copy Rename Block + Layer.
🎯 Target platform: AutoCAD and AutoCAD-based verticals that support Visual LISP, ActiveX COM, DCL dialogs, ObjectDBX, block references, layers, and standard DWG block table records.

🧰 Load the LISP with APPLOAD or (load "AttachImagesToBlocks.lsp").
🚀 Run AttachImagesToBlocks for Mode A, which attaches matched PDF or image files in model space at the matching block insertion point plus optional dX and dY offsets.
📤 Run CopyPDFsToBlocks for Mode B, which copies and renames matched PDF files on disk without changing the drawing.
🧩 Run AddPDFsToBlockDefs for Mode C, which attaches a PDF or image temporarily in model space, transforms it into the matched block definition, and removes the temporary model space copy.
📘 Target platform: AutoCAD and Civil 3D with AutoLISP, Visual LISP COM support, DCL dialog support, and the AutoCAD -ATTACH command.

🧰 Load the AutoLISP routine that defines Convert3DFaceToPolyline with APPLOAD or the project ribbon/tool palette loader.
🚀 Run Convert3DFaceToPolyline from the AutoCAD command line or from the ribbon tooltip entry.
📌 Select one or more 3D Face or 3DFACE objects when prompted.
📐 The routine reads the vertex DXF data through entget, builds point variables such as pt1, pt2, pt3, and pt4, and creates closed polylines with the AutoCAD PLINE command.
📘 Target platform: AutoCAD and Civil 3D with standard AutoLISP command support.

🧰 Load the LISP file with APPLOAD or (load "3DF_to_3DPoly.lsp").
🚀 Run the command 3df2pl in AutoCAD or Civil 3D.
📌 Select one or more 3DFACE entities when prompted.
🧩 The routine creates a closed 3DPOLY for each selected face using the 3DFACE vertex DXF points 10, 11, 12, and 13.
📘 Target platform: AutoCAD and Civil 3D with Visual LISP and standard AutoLISP command support.

🧰 Load the AutoLISP file with APPLOAD or by using (load "BMEntityPos.lsp") in AutoCAD or Civil 3D.
🚀 Run BMEntityPos to open the DCL dialog named Bookmarked Entity Positions.
📌 Use Pick from drawing to select supported entity types and append them as bookmark records.
🔍 Use Zoom to return to the stored entity position or refreshed entity extents.
📝 Use Set, Duplicate, Delete, Clear, Save, Load, and Import to manage the bookmark list.
🔧 Target platform: AutoCAD and Civil 3D using AutoLISP, Visual LISP ActiveX, and a runtime-generated DCL user interface.

🧰 Load the plugin with NETLOAD by selecting XRNET.dll.
🚀 Run XRNET to open the main modeless xref management window inside AutoCAD or Civil 3D.
🧩 Run XRSPLIT to open the native xref splitter interface.
📘 Run XRPREDEFINEDFOLDERS to edit saved project folder shortcuts.
📤 Run XRSAVELOG to export the operation log.
🔧 Target platform: AutoCAD and Civil 3D x64 using a C# .NET Framework 4.8 plugin.

🚀 Load the plugin with NETLOAD, select BoQExtra.dll, and run the command BoQExtra inside AutoCAD or Civil 3D.

🧩 Main project files include BoQExtra.csproj, Commands.cs, MainForm.cs, LengthAreaEngine.cs, BlockCounterEngine.cs, SelectionEntityTools.cs, PreviewControl.cs, ProfileManager.cs, and AcadFieldBuilder.cs.

📌 Main workflow: load BoQExtra.dll, open the modeless interface with BoQExtra, select drawing entities or block references, review the Length and Area table or Blocks table, validate the preview, copy formulas, place MTEXT results in model space, edit layers or polylines, and export quantity data for BoQ documentation.

🧰 Target platform: AutoCAD and Civil 3D using .NET Framework 4.8 and the AutoCAD managed .NET API.

🚀 Main command: SetPlotDeviceNames
🔍 Layout filter: supports * and ? wildcard filtering.
🖨️ Apply actions: Apply Device, Apply PageSetup, Apply Paper.
🔒 Viewport tools: Lock, Unlock, AnnON, AnnOFF, Zoom Extents, Zoom Window.

🚀 Main command: DuplicateLayouts
🧰 Load the LSP file with APPLOAD, then run the command from the AutoCAD command line.

🚀 Main command: LayoutTools
🔁 Alias command: _LayoutTools
🧰 Load the LSP file with APPLOAD, then run the command from the AutoCAD command line.

Commands

• ZEZW Main command that launches the selection dialog and triggers zoom actions.
• ZEZW Alias command (same behavior).
• _ZEZW Alias command (same behavior).

🚀 Main command: LayerCreation
⌨️ Command-line fallback: NEWLAYERCLI
🎨 Layer fields: Name, Color, Linetype, Lineweight, Transparency.
⚙️ New object defaults: CELTSCALE, CETRANSPARENCY, THICKNESS, and Set as current layer.

🚀 Main command: TotalLengthAreaDetailed. The command opens a DCL dialog where the user chooses Length or Area, Excel output, CEILING rounding, MTEXT placement, decimal precision, and optional Profile_002 profile conversion.

Command name: CopySelection How to run: Load the LISP file, then type CopySelection in the command line and press Enter. • Entity selection: First select one LWPOLYLINE when prompted “Select LWPolyline”; other entity types are rejected. • Point selection: Specify the first and second points on that polyline; the routine projects those picks onto the polyline and uses the segment between them as the base for the new geometry. • Dialog control: A dialog named PLDupeLayerEx is shown where you choose the target layer, filter layers by name, enable or disable Extra options, and use Apply, Undo, OK, or Cancel to control the operation.

Main command: 3CORD

Command name: ToolbarManager How to run: Type ToolbarManager in the command line after loading the LISP and press Enter. • Dialog title: Opens a dialog labeled “Toolbar Manager” containing filter, group, visibility, and toolbar list controls. • Selection workflow: Adjust filter / group / visible only, select the toolbars you want active in the list, then use Apply or OK to update toolbar visibility.

Command Name: CreatesXrefsLayersAssign Type CreatesXrefsLayersAssign in the AutoCAD command line to open the “Xref layers” dialog. If no xrefs are found the program prints “No xrefs found.” and exits cleanly.

ZOOMXREF, SELECTXREF

🚀 Primary command: XRefs2LayersOptions
🔘 Option 1: XRefsTo_Xref / X2_XREF — moves all detected XREF inserts to one layer named _XREF.
📂 Option 2: XRefsToLayers / X2L — moves each XREF insert to its own layer using the 0-XREF_ prefix.
🪟 Dialog helper: radioX2LDCL creates a small DCL option dialog for choosing the workflow.

🧰 Main commands:
– XrefDrawingOrder_017 — opens the full XREF Drawing Order manager for build 017.
– XRDO_017 — short command alias for the same modeless dialog.

🚀 Loading workflow:
– Build or locate XrefDrawingOrder_017.dll.
– Load it with NETLOAD in AutoCAD or Civil 3D.
– Run XrefDrawingOrder_017 or XRDO_017 from the command line.

Command name: T2M2 How to run: Load the LISP file, then type T2M2 in the command line and press Enter. • Selection: When prompted, select any combination of TEXT and MTEXT entities to be converted into one MTEXT object.

Command name: CTC3 How to run: Type CTC3 in the command line and begin picking nested entities. • CTCCOPY: Runs automatically after picking finishes, collecting text and sending it to clipboard.

Command name: CTC How to run: Type CTC in the command line and press Enter to open the export options dialog. • CTC_1: Runs automatically if “No paragraphs (one line)” is chosen. • CTC_2: Runs automatically if “With paragraphs (line-by-line)” is chosen.

Command: RotateMtextVport

Command name: CASE How to run: Type CASE in the command line and press Enter.

Command: TC — Converts the string contents of selected TEXT/MTEXT to uppercase.

Main command: PREF_SUFF_OKR_TXT — opens the Prefix/Suffix/Round dialog and applies the chosen operation Quick commands: • PREF — uses stored prefix Add/Remove values and applies prefix operation directly • SUFF — uses stored suffix Add/Remove values and applies suffix operation directly • OKR_TXT — uses stored digit count and rounds numeric text directly Selection: Prompts to select TEXT, MTEXT, INSERT (first ATTRIB only), and standalone ATTRIB entities for processing

Command: PlusMinusNumericValue (sometimes documented as INV3) How to run: Type PlusMinusNumericValue in the command line and press Enter Dialog: “Plus / Minus” dialog with two edit boxes: • Plus or Minus value — amount to add or subtract (supports integer or real) • Location [1..n] — which numeric block(s) to change: number index, “All”, or left empty for default 1 Selection: After dialog, selects TEXT, MTEXT, ATTRIB, ATTDEF entities with ssget filter

Command name: Region2Polyline How to run: Type Region2Polyline or call c:Region2Polyline Selection mode: Automatically selects all REGION objects in the drawing (ssget “_x”) Operation: Converts each REGION into a closed LWPOLYLINE using Gilles Chanteau’s algorithm

Command name: CopySelection How to run: Type COPYSELECTION and press Enter Prompts sequence: Select LWPolyline → Specify 1st Point → Specify 2nd Point → Choose Layer Selection rules: Command stops if selected object is missing or not a LWPOLYLINE

Main command: CopySelection
Alias: CSEL

Main command: WPS

Main command: LOADRECENT
Alternate command: LOADRECENT_DCL

Load command: loadedDLLFiles
Unload command: unloadedDLLFiles

Main command: CHECKPARENS

Main command: CHKFILE

🚀 Main command: AAOFF
🎛️ Dialog title: ANNOALLVISIBLE -> 0 (Choose Tabs)
🧭 Workflow: choose Model and/or Layout tabs, then apply ANNOALLVISIBLE = 0 to the selected tabs.

🚀 Main command: SelectLayout
🧰 Opens a DCL list of paper space layouts and switches AutoCAD to the selected layout tab.

🚀 Main command: GoToLayout
🧰 Load the LSP file with APPLOAD, then run the command from the AutoCAD command line.

• Command: AAON

🚀 Main command: Copy2Layouts
🚀 Macro alias: _Copy2Layouts
🔍 Layout filter supports AutoCAD wildcard patterns using * and ?
🧰 The dialog lets the user pick objects, filter target layouts, multi-select layouts, and copy the selection to the selected layout blocks.

🚀 Main command: LAYOUTNUM
🔁 Alias command: _LAYOUTNUM
🔁 Alias command: LayoutNum
🧰 Load the LSP file with APPLOAD, then run the command from the AutoCAD command line.

LOCKALLVP, LockAllVp, _LOCKALLVP

🚀 Main command: LZE
🔎 Opens a DCL layout selector to run Zoom Extents on selected paper space layouts.

🚀 Main command: ZEZW
⚡ Alias command: _ZEZW
🔎 Opens a DCL dialog for Zoom Extents or Zoom Window operations on selected layouts.

All_Layouts_list, ALL_LAYOUTS_LIST

🚀 Main command: FreezeLayersInVP
🔁 Alias command: FLVP
🧰 Load the LSP file with APPLOAD, then run the command from the AutoCAD command line.

Commands: TitleBlocksTools, EXPTBCSV_EXPORT, UTB2

• Command: Zoom2Layer

🚀 Main command: RenameLayer
🧩 Internal helpers: RL:SafeStr, RL:BuildList, RL:IdxToNames, RL:Replace, RL:ExecuteRename, RL:WriteDCL
🪟 Dialog title: Layer Rename v3.5
📄 Temporary DCL file: RL_Temp.dcl created under the AutoCAD ROAMABLEROOTPREFIX Support folder.

🚀 Main command: PURGEUNUSEDLAYERS
🧩 Load the LSP in AutoCAD or Civil 3D, then type the command at the command line.

🚀 Main command: LayersNameToClipboard
🧩 Load the LSP in AutoCAD or Civil 3D, then type the command at the command line.

🧰 Load the LISP file with APPLOAD or by using (load "LayerList.lsp").
🚀 Run LLFP to open a save-file dialog and export the current drawing layer list to a .txt report.
📌 Main command function: c:llfp.
🧠 Main reporting helper: ax:layer-list.
📤 File writer helper: layer-list-fprint.
🎯 Target platform: AutoCAD and Civil 3D with Visual LISP COM support through vl-load-com, vlax-get-acad-object, and the AutoCAD ActiveX layer collection.

🚀 Export command: ExpFltr
📥 Import command: ImpFltr
🗂️ Folder manager command: LfPredefinedFolders
📁 Import supports .lft, .dwg, and .dwt sources.

🚀 Main command: FLMS3
🔍 Filter by current layers, xref layers, or current and xref layers together.
🧰 Apply Freeze, Unfreeze, Off, On, Lock, Unlock, Plot, or NoPlot to selected matching layers.

🚀 Export command: ExpFltr
📥 Import command included: ImpFltr
🧪 Debug command: ExpFltrDebug
🗂️ The DCL workflow supports Select All, Select None, Use Xref, Prefix, Suffix, predefined folders, and Manage Folders.

🚀 Main command: DuplicateToSelectedLayer
📋 Select entities first inside the command, choose the destination layer from the DCL list, then the routine creates same-position duplicates.
🧠 The last chosen target layer is persisted with the DuplicateToLayer_LastLayer environment variable.

🚀 Main command: DeleteLayerByFilter
🧰 List-based command: LayDelByList
🖥️ The DeleteLayerByFilter dialog provides five layer filter boxes, Apply Filters, Clear All Filters, Civil_3D_Layers, Architecture, Survey, Structural presets, Save Preset, Load Preset, Export Selected, Export Displayed, Export All Matching, Delete Selected, Delete All Matching, and Cancel.

🚀 Main color changer command: XCC – opens the Extended Layer Color Changer dialog
🚀 Lowercase alias: xcc – opens the same color changer dialog
🚀 Diagnostic command: XCCDEBUG – prints a debug report for DCL and environment troubleshooting
🚀 Test command: XCCTEST – prints a simple test confirmation

🚀 Layer change command: ChangeLayerToCurrent – opens a searchable layer selector and moves selected objects to the chosen layer

• ChangeLayerToCurrent

🚀 Main dialog command: BYLAYERDLG – opens the ByLayer Tool DCL interface
🚀 Alias command: BYLAYER – runs the same DCL interface
🚀 Command-line mode: BYLAYERCMD – runs Color/Linetype/Both from the command line
🚀 Diagnostic command: BLDEBUG – writes a debug report for DCL/environment troubleshooting

🚀 Split hatch command: SplitHatch – separates selected multi-boundary hatch objects

🚀 Main command: MleaderStraightTools
📌 Selection mode: process preselected or interactively selected MULTILEADER objects.
📊 Current-space mode: process all MULTILEADER objects on the active CTAB layout using the 410 layout filter.

🧰 Main commands: LTM and Leader_To_Multileader. Run LTM for the short command alias or Leader_To_Multileader for the full command name.

🚀 Main command: AddVertex2Mleader

Type AddVertex2Mleader in the AutoCAD command line, select a MULTILEADER object, then pick the point where the new leader vertex should be added.

🧰 Main commands: FixLineTextOverlap, Line_Overlap, Text_Overlap, and Line_Overlap_Text_Overlap.

🔴 FixLineTextOverlap runs the complete workflow: first it spaces selected vertical LINE entities, then it spaces related TEXT and MTEXT using the same rail and spacing settings.
🔴 Line_Overlap spaces vertical lines along a picked crank point and replaces the original lines with clean stepped lightweight polylines.
🔴 Text_Overlap aligns and spaces TEXT and MTEXT labels along a chosen vertical rail, reusing the last rail from Line_Overlap when available.
🔴 Line_Overlap_Text_Overlap is a convenience alias that runs both operations in sequence.

CUT
SCB
SC
SCD

NCopyExtra
NCopyExtraD
NCopyExtraW
NCopyExtraI
ClassicalNCopy

🧰 Main commands:
– MMid2 – move selected AutoCAD objects from a calculated source midpoint to a calculated destination midpoint.
– CMid2 – copy selected AutoCAD objects and place the copied result from the same source midpoint to the destination midpoint.

Primary command: CookieCutter2
Shortcut command: CC
Multi-boundary command: CookieCutter2Multi
Multi-boundary shortcut: CC2M

Run CookieCutter2 or CC in the AutoCAD command line to select one closed trimming boundary, choose the side to process, and trim or erase geometry. Run CookieCutter2Multi or CC2M to keep objects inside any of several selected closed boundaries by erasing objects outside their combined areas.

🚀 Main command: CenterAreaCentroid
📌 Center Area option: MostInnerPoint2
📌 Centroid option: get_centroid

TLEN

Command name TotalLengthAreaDetailed

ELEN

TLENGTH

🚀 Main commands:
– SumLengthField – creates a total length field using current drawing units.
– SumLengthField_1 – creates a total length field with a 0.001 conversion factor, useful for mm to m workflows.
– SumAreaField – creates a total area field using current drawing units.
– SumAreaField_1 – creates a total area field with a 1e-6 conversion factor, useful for mm² to m² workflows.
– SumLengthField_extended – creates the associative length field and adds extra MText annotations for copied result text and difference text.

🚀 Main command: POLYAREA
🧩 AutoLISP function: C:POLYAREA
📌 Object filter: *POLYLINE

🚀 Command: PLLengthByLayer

LenCal

Main Command: • BMEntityPos – opens the “Bookmarked Entity Positions” dialog, where you manage all stored bookmarks (pick from drawing, zoom, remark, save, load, import, filter).

ExpImpNVU, NVVIEWSIO, ExportViews, ImportViews, -ExportViews, -ImportViews

Command: BMEntityPos Execution: Type BMEntityPos then press Enter Selection filter: Prompts for selection of TEXT, MTEXT, LINE, LWPOLYLINE, POLYLINE, CIRCLE, SPLINE, and INSERT entities Feedback: Prints how many entities are currently stored in *textPositions* after processing

Command: ClearTextPos Input: Confirmation via alert dialog (OK / Cancel) Effect: Clears global bookmark storage list

🚀 Main command: NamedViewList
🧭 Entry point: C:NamedViewList
📌 AutoCAD operations used: _-VIEW R, ._RENAME VIEW, vla-get-Views, vla-SetView, vla-delete

SwapBlockAssignLayer

RenBlocks

RenameBlock

🧰 Load the LISP with APPLOAD or by adding DynamicBlockFilter.lsp to the AutoCAD startup suite.
▶️ Run DynamicBlockFilter at the AutoCAD command line to open the dynamic block property filter workflow.
⌨️ The internal function (DynamicBlockFilter) can also be typed at a Select objects: prompt inside another AutoCAD modification command.
🎯 The user selects one source dynamic block, chooses property values in the generated DCL dialog, then the routine returns or highlights all matching block references.
🧩 Target platform: AutoCAD and Civil 3D with Visual LISP COM support through vl-load-com and ActiveX dynamic block APIs.

🧰 Load the LISP file with APPLOAD or another AutoCAD startup loading method.
🚀 Run DelUnusedBlocks to open the generated DCL dialog named Delete Unused Blocks.
📌 The target platform is AutoCAD with Visual LISP and ActiveX COM support through vl-load-com.
📄 Main source file: DelUnusedBlocks_DCL.lsp.
💾 User settings are stored in DelUnusedBlocks.cfg, normally under ROAMABLEROOTPREFIX, with fallback paths using DWGPREFIX, TEMPPREFIX, or the current folder.

🧰 Load the LISP with APPLOAD or by adding DynamicBlockCounter.lsp to the AutoCAD startup suite.
▶️ Run DBCOUNT or c:dbcount to start the Dynamic Block Counter workflow.
📌 The command scans INSERT entities in the current AutoCAD layout, prompts the user to select blocks to count or press Enter to count all detected blocks, prints the summary to the command line, and optionally exports the result to TXT or CSV.
🎯 Target platform: AutoCAD and Civil 3D with Visual LISP COM support enabled by vl-load-com.

🧰 Load the LISP file with APPLOAD or by loading DelSelectBlock_DCL.lsp.
▶️ Run DelSelectBlock at the AutoCAD command line to open the generated DCL dialog.
📌 The workflow is: choose a block name from the list, type a block name manually, or use Pick < to select a block reference from the drawing, then press OK to delete all matching INSERT entities.
🔒 The target platform is AutoCAD with Visual LISP COM support through vl-load-com.

🧰 Load the LISP file with APPLOAD or by using (load "DeleteBlocks.lsp").
Run DELBLOCKS to open the DCL block deletion dialog.
The main AutoLISP entry point is c:delblocks.
The tool targets AutoCAD and AutoCAD-based platforms that support AutoLISP, Visual LISP COM, and DCL dialogs.

Command name: CopyBlockChangeLayer How to run: Load the LISP file, then type CopyBlockChangeLayer in the command line and press Enter. • Selection: You are prompted to select a single block reference that is not on a locked layer. • Dialog: After selection, a dialog opens with mode selection, new block name, optional layer tools, and a “Delete Initial Block” toggle.

Command name: ChangeBlockEntitiesLayer How to run: Type ChangeBlockEntitiesLayer in the command line and press Enter. • Selection: When prompted, select one or more block references (INSERT objects) whose internal entities you want to move to the block layer.

• Command name: OFFSET3D
• Select a 3D polyline when prompted.
• Enter the offset distance via keyboard input.

🧰 Main command: SteSysVar. Optional command: SteSysVarPublish. SteSysVar opens the full environment tuner starting on the File tab. SteSysVarPublish opens directly on the Publish tab for quick access to PUBLISHCOLLATE.

Command: c:HS Opens the “Display Objects Options” dialog where you can select whether to isolate selected objects, hide them, or show all objects again.

Command: c:BG Opens a DCL-based “Background Changer” dialog allowing you to pick a background color preset and apply it to Model and/or Paper space.

🚀 Main command: AAOFF
🎛️ Dialog title: ANNOALLVISIBLE -> 0 (Choose Tabs)
🧭 Workflow: choose Model and/or Layout tabs, then apply ANNOALLVISIBLE = 0 to the selected tabs.

Command: C:RotateUCS When run, it switches to World UCS first, then asks for an angle, rotates the UCS, prints the angle, and then asks whether to save the UCS with a name.

🚀 Main command defined in the uploaded code: SETTUPUNITS
🧰 Main settings routine: setunits
📐 Civil 3D drawing settings updated: coordinate system code, drawing scale, angular units, and drawing units.

🚀 Startup behavior: the diagnostic runs immediately when C3D_NamespaceFix.lsp is loaded.
⚙️ Recovery attempt: vl-load-com can be called up to two times when the multiplication symbol is not reported as a SUBR.
📊 Output: C3D Namespace Report in the AutoCAD command line.

🚀 Main dialog command: LFM
⚡ Quick Kable commands: FKABLE, TKABLE, OKABLE, XFABLE, FKABLEI, TKABLEI
🧪 Verification command: VERIFYKABLE
🧰 Helper command: LFM-Kable

Command:

• UnReloadDetachSelectedXrefs — Opens the main dialog window.
• UI buttons — Execute actions and return to the dialog; the dialog closes only via OK or Cancel.

Copy code:

• (UnReloadDetachSelectedXrefs)

• • SetPlotDeviceNames

P2L

🚀 Main commands:
– Copy2BasePoint: selects drawing entities and runs AutoCAD COPYBASE using 0,0,0 as the base point.
– PasteBasePoint: runs AutoCAD PASTECLIP using 0,0,0 as the insertion point.
🧩 Header reference:
– CB: documented as copy with base point 0,0,0 in the original header.
– PB: documented as paste with base point 0,0,0 in the original header.

📌 Main commands: ROTATEUCS and RUCS.
⚡ Quick angle command: RU1 asks for an angle, rotates the UCS, auto-saves the UCS, restores it, and aligns the view.
📐 Quick entity command: RUE asks the user to select an entity, extracts its angle, rotates the UCS, auto-saves the UCS, restores it, and aligns the view.
🧰 Loading method: build RotateUcsCs.csproj as x64, then load RotateUcsCs.dll in AutoCAD or Civil 3D using NETLOAD.
🪟 ROTATEUCS and RUCS open a modeless WinForms palette named Rotate / Manage UCS.
📘 On load, the plugin prints the version banner from BuildInfo.BuildStamp and lists the available commands.
🎯 Target platform: AutoCAD and Autodesk Civil 3D with .NET Framework 4.8, x64, Windows Forms, AutoCAD managed APIs, and references such as AcCoreMgd, AcDbMgd, AcMgd, and AcWindows.

🧰 Load the plugin with NETLOAD by selecting XRNET.dll. The main command is XRNET, which opens the main modeless xref management window inside AutoCAD or Civil 3D. Additional commands include XRSPLIT for the native xref splitter interface, XRPREDEFINEDFOLDERS for saved project folder shortcuts, and XRSAVELOG for exporting the operation log. The target platform is AutoCAD and Civil 3D x64 using a C# .NET Framework 4.8 plugin.

Command UnReloadDetachSelectedXrefs

Command

• Run: SetPlotDeviceNames
• Opens the DCL dialog for layout review and batch actions.

Commands

• DuplicateLayouts opens the dialog and runs the full tool workflow.

• XrefLayers Opens the dialog window.
• CreatesXrefsLayersAssign Alias that opens the same dialog window.

Command name: SLOPE_P Entry: Type slope_p in the command line and press Enter.

Command name: slope_p Execution: Enter slope_p to open the configuration dialog Dialog file: Uses slope_p.dcl, found by findfile or via SLP_DCL_PATH Dialog options: • Below — Yes / No • Text height — label size & offset distance • H scale — horizontal run multiplier • V scale — vertical rise multiplier • Precision — decimal digits displayed • Format — % , H:V , V:H , H:V (x.xx:1) , V:H (1:x.xx)

Command name: CloseParallelPolylines How to run: Type CLOSEPARALLELPOLYLINES and press Enter User prompt: Select two open polylines, arcs, splines, or lines Selection filter: Only accepts LWPOLYLINE, LINE, ARC, SPLINE

• Command: DuplicateLayouts

Main commands: DB_P_G, _DB_P_G, DBPG • How to run: Load the LISP file, then type DB_P_G (or DBPG) and press Enter to open the configuration dialog. • Mode selection: Inside the dialog choose between DB_Planum (radio rb01) or DB_Gelaende (radio rb02). • Geometry commands: The dialog launcher calls C:DB_Planum or C:DB_Gelaende to actually draw leader lines and text labels after the settings are accepted.

Command: c:NavvCubeDisplayOffOn When executed, this command uses ActiveX and vla-sendcommand to issue system commands that control the ViewCube visibility state.